1. PROBE AND PROBE COVER
2. MOISSANITE INDICATOR
3. ADJUSTMENT KNOB
4. TESTING/ BATTERY OK INDICATOR
5. BATTERY COMPARTMENT/ COVER
6.
TEST BUTTON
MT2 MOISSANITE TERMINATOR IS USED TO IDENTITY ARTIFICIAL MOISSANITE GEM STONES AND OTHER MAN MADE SYNTHETIC GEM STONES. NO OTHER INSTRUMENT OR TESTER IS REQUIRED TO IDENTIFY MOISSANITE GEM STONES.
MOISSANITE TESTING INSTRUCTIONS
1. SET THE ADJUSTMENT KNOB TO THE RIGHT
(LARGE STONE SETTING) #3.
2. REMOVE PROTECTIVE END CAP, #1.
3. WITH YOUR
THUMB PRESS THE PRESS AND HOLD BUTTON, #6 WHILE YOUR FINGERS TOUCH THE REAR
METAL PLATE.
4. THE YELLOW TESTING LIGHT #4 SHOULD LIGHT AND MUST STAY ON
DURING ALL TESTING.
5. WITH YOUR OTHER HAND HOLD THE METAL PART OF THE RING
OR ANY SOLID METAL PART CONTAINING THE GEM STONE. WHEN USING THE LOOSE STONE
HOLDER YOUR OTHER HAND MUST HOLD THE LOOSE STONE HOLDER.
6. PLACE THE TESTER
PROBE IN THE CENTER OF THE GEM STONE TO BE TESTED WITHOUT TOUCHING THE TESTER
PROBE TO ANY METAL SURFACE. DO THIS IN A MANOR THAT THE METAL PART OF THE
TESTING PROBE IS AS FAR AWAY AS POSSIBLE FROM ANY METAL FINDINGS OR GEM HOLDING
DEVICE. BECAUSE MOISSANITE GEM STONES ARE INCONSISTENT, FOR BEST RESULTS BE SURE
TO TOUCH 3 OR 4 POINTS AROUND THE CENTER OF THE GEM STONE.
7. IF A MOISSANITE
GEM STONE IS BEING TESTED YOU WILL HEAR A DISCONTINUOUS BEEP AND SEE A FLASHING
GREEN LIGHT, #2
8. REAL GEMSTONES WILL NOT INDICATE WHEN USING THE MT2
TESTER. IN ORDER TO IDENTIFY NATURAL DIAMONDS A THERMAL DIAMOND TESTER SUCH AS
THE R S MIZAR "PRESTIGE SERIES II" MUST BE USED
9. USE THE SMALL STONE
SETTING ONLY WHEN TESTING SMALL STONES, APPROXIMATELY 3.5 MM OR SMALLER, OR WHEN
YOU CANNOT KEEP THE PROBE A TENTH OF AN INCH FROM THE METAL PRONGS OR
SURFACE.
NOTE: TO TEST UNMOUNTED STONE PLACE STONE IN LOOSE STONE HOLDER. ALWAYS HOLD
THE LOOSE STONE HOLDER WITH YOUR FREE HAND.
HELPFUL HINTS
· ALWAYS MAKE SURE THAT THE GEM STONE TO BE TESTED IS DRY AND CLEAN.
· THE
ONLY ERROR WHICH CAN BE MADE IS GETTING TO CLOSE TO THE METAL SURFACE. WHEN THIS
HAPPENS A SMALL BLUE GLOW CAN USUALLY BE OBSERVED FROM THE PROBE TO THE METAL.
IF THIS HAPPENS A MOISSANITE INDICATION WILL BE SEEN & HEARD. KEEP THE PROBE
AWAY FROM THE METAL SURFACES.
· IT IS BEST TO TEST IN A CIRCULAR MOTION
AROUND THE CENTER OF THE GEMSTONE. SEVERAL POINTS ON THE STONE SHOULD ALWAYS BE
CHECKED.
· THE YELLOW TESTING LIGHT MUST REMAIN ON DURING ALL TESTING. IF IT
DOESN'T THE BATTERY NEEDS REPLACING. A 9 VOLT TYPE NEDA SIZE 1604 (006P)
· TO
IDENTIFY MOISSANITE GEM STONES AND OTHER MAN MADE SIMULANTS ONLY THE "MT-2"
TESTER IS REQUIRED
· NO INDICATION WILL BE SEEN OR HEARD WHEN USING THE
"MT-2" TESTER ON ANY NATURAL GEM STONES.
· A FUNCTION TEST CAN BE DONE BY
SIMPLY TOUCHING YOUR FREE HAND TO THE TESTER PROBE. MOISSANITE WILL BE
INDICATED.
WARRANTY
O.N.E. PROVIDES THAT EACH MOISSANITE TESTER WILL BE
FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP FOR A PERIOD OF ONE YEAR FROM THE
DATE OF PURCHASE (BATTERY NOT INCLUDE IN WARRANTY). THIS WARRANTY WILL BECOME
VOID BY:
· UNAUTHORIZED REPAIR, MISUSED, MODIFICATION, OR ALTERATION,
·
ACCIDENTAL DAMAGE, NEGLECT OR IMPROPER USE.
O.N.E. SHALL NOT BE HELD
LEGALLY LIABLE OR RESPONSIBLE FOR ANY ERROR IN DISPLAY INDICATION OR
INTERPRETATION THEREOF IN THE IDENTIFICATION OF ANY STONES, MINERALS, GEMS, OR
GEMSTONES BY THE MOISSANITE TESTER.
WARRANTY SERVICE
SHOULD THIS
TESTER REQUIRE WARRANTY SERVICE YOU MUST CALL OR WRITE O.N.E. FOR A RETURN
MATERIAL AUTHORIZATION [R.M.A.] BEFORE RETURNING IT FOR REPAIR. ALL RETURNS MUST
BE ACCOMPANIED BY A COPY OF THE ORIGINAL SALES RECEIPT. ANY RETURNS WITHOUT THE
R.M.A. NUMBER ON THE OUTSIDE OF THE PACKAGE WILL NOT BE ACCEPTED AND WILL BE
RETURNED TO SENDER.
Oris Nelson Enterprise, Inc.
511 N. Indian River Dr.
Fort Pierce, FL
34950
Phone 772-429-0045
Fax 772-429-0170